Network Transceivers - Page 4 - Blowout Sale! Save up to 56%


Blowout Sale! Up to 56% off on Network Transceivers at Tobby News, Page 4. Top brands include AV Access, ipolex, Brute Networks, MakerFocus, ADnet, 10Gtek, NETGEAR, X10, H!Fiber.com, HP, Xiuxin, TP-Link, CARANTEE, & FiberHal. Hurry! Limited time offers. Offers valid only while supplies last.



AV Access HDMI USB KVM Extender, 260ft 1080P 60Hz over Cat5e/6, 2 Ports USB2.0, No signal Loss and Latency, With PoE and Auto EQ management.
AV Access HDMI USB KVM Extender, 260ft 1080P 60Hz over Cat5e/6, 2 Ports USB2.0, No signal Loss and Latency, With PoE and Auto EQ management.
By AV Access
In Stock
$189.99
$139.99
You Save: 26%

mpn: B073B84CY1,

4.6 out of 5 stars with 86 reviews
Over View:The HDEX80-KVM extend full HD HDMI signal up to 80 meters via a single CatX cable, without any video loss and time delay. With USB2.0 pass-through and USB Host connector in transmitter, and USB Device connectors in receiver, it provides remote source PC control with keyboard and mouse, interactive display operation,data transmission and USB streaming over distances up to 80m. Power over Ethernet (PoE), integrates power into the Cat5e/6 cable, requiring no power supply for either the


Gigabit Ethernet multi-mode LC fiber Media Converter (SFP SX Transceiver included), up to 550M, 10/100/1000Base-Tx to 1000Base-SX, ipolex
Gigabit Ethernet multi-mode LC fiber Media Converter (SFP SX Transceiver included), up to 550M, 10/100/1000Base-Tx to 1000Base-SX, ipolex
By ipolex
In Stock
$79.99
$39.99
You Save: 50%

mpn: Kit#1,SFP Converter&550M Transceiver, ean: 0603149405363,

4.0 out of 5 stars with 75 reviews
ipolex's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter. The converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums. Main Features: Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x Auto negotiation


370-ABUJ - Dell Compatible 8GB PC4-17000 DDR4-2133Mhz 2Rx8 1.2v ECC Registered RDIMM
370-ABUJ - Dell Compatible 8GB PC4-17000 DDR4-2133Mhz 2Rx8 1.2v ECC Registered RDIMM
By Brute Networks
In Stock
$139.95

mpn: 370-ABUJ-BN, ean: 0651208799168,

4.2 out of 5 stars with 75 reviews
Dell Compatible 370-ABUJ - 8GB PC4-17000 DDR4-2133Mhz 2Rx8 1.2v ECC Registered RDIMM 370-ABUJ-BN is a Dell compatible 8GB PC4-17000 DDR4-2133Mhz 2Rx8 1.2v ECC Registered RDIMM, equivalent to Dell labeled PN#: 370-ABUJ. Brute Networks modules are all major brand (Samsung, SK Hynix, or Micron). This module is guaranteed compatible with your server, as well as guaranteed to maintain your factory warranty, since Brute Networks modules are from the same manufacturers Dell uses for their OEM branded


MakerFocus ESP32 Open Source Faces Pocket Computer with Keyboard/Gameboy/Calculator M5Stack Board Built-in 650mAh Battery for MicroPYTHON Arduino
MakerFocus ESP32 Open Source Faces Pocket Computer with Keyboard/Gameboy/Calculator M5Stack Board Built-in 650mAh Battery for MicroPYTHON Arduino
By MakerFocus
In Stock
$99.99
$85.99
You Save: 14%

mpn: 22T34KO4IAO11OJ9, ean: 0190033932680,

4.0 out of 5 stars with 140 reviews
ESP32 Open Source Faces Pocket Computer with Keyboard/Gameboy/Calculator M5Stack Board Built-in 650mAh Battery for MicroPYTHON ArduinoHow to upgrade the FACES panel? PLS download Source File from: github.com/m5stack/FACESFeatures:Equipped with a full keyboard panel, digital panel as well as Gameboy panel, are free to change the different operating community surface.Each panel can be modified to upgrade, just like Arduino Pro, download firmware through ISPBuilt-in 650mAh battery, set with


MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Arduino
MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Arduino
By MakerFocus
In Stock
$10.99

mpn: 4335277725, ean: 0702646045932,

4.1 out of 5 stars with 14 reviews
2pcs I2C OLED Display Module 128x32 OLED 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for ArduinoDescription:OLED display, no need backlight, self-illumination.The display performance is better than the traditional LCD display, also lower consumption.Specifications:Driver IC: SSD1306Size: 0.91 inch OLEDResolution: 128 x 32Size: 38 * 12 mmInterface Type: IIC interfaceDisplay Color: WhitePin Description:GND: Power GroundVCC: Power + (DC 3.3 ~5v)Operating


Single Mode Gigabit Fiber Media Converter - Built-In Fiber Module 20 km (12.42 miles) SC – to UTP Cat5e Cat6 10/100/1000 RJ-45 – Auto Sensing Gigabit or Fast Ethernet Speed - Jumbo Frame - LLF Support
Single Mode Gigabit Fiber Media Converter - Built-In Fiber Module 20 km (12.42 miles) SC – to UTP Cat5e Cat6 10/100/1000 RJ-45 – Auto Sensing Gigabit or Fast Ethernet Speed - Jumbo Frame - LLF Support
By ADnet
In Stock
$42.95

mpn: AN-UMGSM-AS-20J, ean: 0789185566562,

4.9 out of 5 stars with 139 reviews
Extend your Gigabit or Fast Ethernet Network Over Single Mode Fiber Up to 20 km With Ease AN-UMGSM-AS-20J Will Automatically Detect 10 Mbit/s or 100 Mbit/s Fast Ethernet or 1000 Mbit/s Gigabit port - You just need plug in the cables and it will work right away! Powering it up? Easy, it will come with AC power adapter in set, just plug it! All These Important Features Are All Supported: Compliant with IEEE 1000Base-T and 1000Base-LX One 10/100/1000Base-T RJ-45 port autosensing featured One




NETGEAR WiFi Range Extender
NETGEAR WiFi Range Extender
By NETGEAR
In Stock
$109.99

mpn: EX6920, ean: 0768430818816,

4.4 out of 5 stars with 101 reviews
View larger View larger View larger View larger View largerWiFi Where you Want itBoost the range of your existing WiFi and create a stronger signal in hard-to-reach areas. Is there a void between your WiFi router and your devices? Add a WiFi Extender and strengthen your connection.Boost AC1200 Wi-Fi to create faster dual band Wi-Fi access with 802.11ac technology up to 1200 Mbps. Two Wi-Fi Modes: Range extender or AC Wi-Fi access point. Ethernet Port for connect a wired device like a game


X10 R.F. PC Transceiver (CM19A)
X10 R.F. PC Transceiver (CM19A)
By X10
In Stock
$17.99

mpn: CM19A, ean: 0099081321227,

4.1 out of 5 stars with 115 reviews
USB Firecracker Transceiver. Model CM19ADim and control lighting with your PC. Control cameras and appliances directly from your computer. Plugs into your PC's USB port.


10Gtek for Juniper QFX-QSFP-DAC-3M, 40Gb/s QSFP+ Ethernet Direct Attach Copper Cable Passive, 3-Meter
10Gtek for Juniper QFX-QSFP-DAC-3M, 40Gb/s QSFP+ Ethernet Direct Attach Copper Cable Passive, 3-Meter
By 10Gtek
In Stock
$77.99
$48.88
You Save: 37%

mpn: CAB-QSFP-P3M-30-Juniper, ean: 0711811486579,

4.7 out of 5 stars with 62 reviews
Juniper P/N:QFX-QSFP-DAC-3M QSFP+ to QSFP+ Ethernet Direct Attach Copper 3 m passive Data Rate:40Gbps AWG:30 Length:3-meter(include the connectors) Temp(℃):0~70QSFP+ to QSFP+ DAC, Passive, 3-meter, AWG30. Compatible for Juniper QFX-QSFP-DAC-3M (QSFP+ Cable Assy, 3m, Passive). Each DAC Cable is individually tested on Juniper switches before delivery. Data Rate: 40Gb/s. 10Gtek is a manufacturer of Direct Attach Copper Cable, Customized sevice is available.


10Gtek for Cisco SFP-H10GB-CU3M 10GBASE-CU Direct Attach Copper Cable, Twinax Cable, Passive, 3-meter, Pack of 10
10Gtek for Cisco SFP-H10GB-CU3M 10GBASE-CU Direct Attach Copper Cable, Twinax Cable, Passive, 3-meter, Pack of 10
By 10Gtek
In Stock
$385.99
$228.98
You Save: 41%

mpn: CAB-10GSFP-P3M-30(Cisco-10pcs),

4.4 out of 5 stars with 129 reviews
DESCRIPTION:  For Cisco SFP-H10GB-CU3M  SFP+ to SFP+  AWG30, Passive  10Gb/s  DAC (Direct Attach Copper Cable)  10Gtek Connectivity's SFP+ direct attach copper cable assemblies are a high speed, cost-effective alternative to fiber optics in 10Gb Ethernet, 8Gb Fiber Channel and InfiniBand applications. SFP+ copper cable assemblies enable hardware OEMs and data center operators to achieve high port density and configurability at a low cost and reduced power requirement. 10Gtek SFP+ copper


SFP+10GBASE-T Transceiver Copper RJ45 Module Compatible Cisco, Reach 30m
SFP+10GBASE-T Transceiver Copper RJ45 Module Compatible Cisco, Reach 30m
By H!Fiber.com
In Stock
$198.00

mpn: 10G-SFP-T-Cisco, ean: 0602693071291,

4.2 out of 5 stars with 126 reviews
The 10G-SFP-T copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7 cable. This is the first SFP+ transceiver that offers 10 Gb/s communication over this type of media.   Features: • Supports Links up to 30m using Cat 6a/7 Cable • SFF-8431 and SFF-8432 MSA Compliant • IEEE 802.3az Compliant • Low Power


HP Procurve SFP-GBIC LX-LC J4859C
HP Procurve SFP-GBIC LX-LC J4859C
By HP
In Stock
$69.99

mpn: J4859C, ean: 8536692582187,

4.9 out of 5 stars with 143 reviews
HP PROCURVE SWCH SFP-GBIC LX-LCProCurve Gigabit-LX-LC Mini-GBIC is a small form factor pluggable (SFP) gigabit LX transceiver that provides a full-duplex gigabit solution up to 10 km (singlemode) or 550 m (multimode)..


3pcs ESP8266 NodeMcu Lua CP2102 WIFI Internet Development Board Wireless Module works with Arduino IDE/Micropython
3pcs ESP8266 NodeMcu Lua CP2102 WIFI Internet Development Board Wireless Module works with Arduino IDE/Micropython
By Xiuxin
In Stock
$16.85
$13.98
You Save: 17%

ean: 0666389686374,

4.3 out of 5 stars with 60 reviews
Description: Material: Experimental Board + Mixed Alloy Color: Black Chip Module: CP2102 Working Temperature: -40 ℃ ~ +125 ℃ Power Input: 4.5V ~ 9V (10VMAX), USB-powered Drive Type: Dual high-power H-bridge driver Current: continuous transmission ≈70mA (200mA MAX) Standby:3pcs/lot develop ESP8266 module,CP2102 chip, Built-in Micro-USB,with flash and reset switches. Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. ESP8266 has IO pin leads directly


MakerFocus ESP32 Development Board WIFI Bluetooth LoRa Dual Core 240MHz CP2102 with 0.96inch OLED Display and 868/915MHZ Antenna for Arduino
MakerFocus ESP32 Development Board WIFI Bluetooth LoRa Dual Core 240MHz CP2102 with 0.96inch OLED Display and 868/915MHZ Antenna for Arduino
By MakerFocus
In Stock
$27.99

mpn: 4335277708, ean: 0190033873006,

4.0 out of 5 stars with 121 reviews
Description:WIFI Kit series is the new development cost-effective networking program of our company, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).This product is based on the WIFI Kit 32 added SX1276 chip, that is, LoRa remote modem,




CARANTEE WiFi Range Extender- 300Mbps 1615 sq.ft (40 ft Range) 360 Degree Full Coverage WiFi Repeater, with Dual External Antennas Complies 802.11b/g/n Simple Operation WiFi Extender
CARANTEE WiFi Range Extender- 300Mbps 1615 sq.ft (40 ft Range) 360 Degree Full Coverage WiFi Repeater, with Dual External Antennas Complies 802.11b/g/n Simple Operation WiFi Extender
By CARANTEE
In Stock
$20.99

ean: 0673257111197,

4.4 out of 5 stars with 51 reviews
CARANTEE WiFi Extender - Match Your Smart Life 1615 sq.ft (40 ft Range) 360 DEGREE FULL SIGNAL COVERAGE! Suits for any type of houses! With this WiFi range extender, all the dead spots in house with weak Wi-Fi coverage will be eliminated! No more dead zones! ONE BUTTON OPERATION! EASY SET UP! This WiFi signal booster can easily expand the wireless coverage by press the WPS button. Which only takes 8 seconds! Or you can set up via log in the website on any mobile devices. HIGH SPEED AND STABLE


FiberHal for Mikrotik S+31DLC10D SFP+ Module, 10GBase LR LC SMF SFP Transceiver, 1310nm, Reach 10km
FiberHal for Mikrotik S+31DLC10D SFP+ Module, 10GBase LR LC SMF SFP Transceiver, 1310nm, Reach 10km
By FiberHal
In Stock
$60.99
$50.99
You Save: 16%

ean: 0713902201900,

4.1 out of 5 stars with 8 reviews
Specification: For Mikrotik S+31DLC10D, SFP 10G-LR-LC Wavelength: 1310nm, dual LC/PC connector Distance: 10km Temperature Range: Commercial 0℃ to 70℃ Hot Swappable and DDM Single-mode Fiber (SMF) br> Warranty: 30 days money back & Lifelong limited warranty Application: CCR1036-8G-2S+ CCR1036-8G-2S+EM. Non-MikroTik SFP devicesCompatible for Mikrotik S+31DLC10D, Support DDM. Data Rate: 10.3125Gb/s; Distance up to 10km (6.2miles). Wavelength: 1310nm, @9/125μm, Single-mode 10gb lr. Duplex LC




SNPM9FKFC/32G - Dell Compatible 32GB PC3-10600 DDR3-1333Mhz 4Rx4 1.35v ECC Registered RDIMM
SNPM9FKFC/32G - Dell Compatible 32GB PC3-10600 DDR3-1333Mhz 4Rx4 1.35v ECC Registered RDIMM
By Brute Networks
In Stock
$369.95

mpn: SNPM9FKFC/32G-BN, ean: 0651208800284,

4.6 out of 5 stars with 145 reviews
Dell Compatible SNPM9FKFC/32G - 32GB PC3-10600 DDR3-1333Mhz 4Rx4 1.35v ECC Registered RDIMM SNPM9FKFC/32G-BN is a Dell compatible 32GB PC3-10600 DDR3-1333Mhz 4Rx4 1.35v ECC Registered RDIMM, equivalent to Dell labeled PN#: SNPM9FKFC/32G. Brute Networks modules are all major brand (Samsung, SK Hynix, or Micron). This module is guaranteed compatible with your server, as well as guaranteed to maintain your factory warranty, since Brute Networks modules are from the same manufacturers Dell uses for



Viewing Page 4 of 6

View more products in Networking Products.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - tobbynews.com. All Rights Reserved.