KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible


Super Savings Item! Save 36% on the KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible by KEYESTUDIO at Tobby News. MPN: ks0095. Hurry! Limited time offer. Offer valid only while supplies last. Specification: (1)3D Printer CNC Shield Board V3.0 GRBL compatible. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Spindle enable and direction Coolant enable Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) Compact design.


Images:
KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible by KEYESTUDIO (Image #1)
KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible by KEYESTUDIO (Image #2)
KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible by KEYESTUDIO (Image #3)
KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible by KEYESTUDIO (Image #4)
KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible by KEYESTUDIO (Image #5)
KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible by KEYESTUDIO (Image #6)
KEYESTUDIO UNO R3 CNC Kit/CNC Shield V3.0 +4pcs A4988 Stepper Motor Driver + UNO R3 ATmega328P with Usb Cable for Arduino GRBL Compatible by KEYESTUDIO (Image #7)
4.3 out of 5 stars with 71 reviews
Condition: New
Availability: In Stock
$27.99
$17.99
You Save: 36%


Quantity:  

 



Product Description & Reviews

Specification: (1)3D Printer CNC Shield Board V3.0 GRBL compatible. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Spindle enable and direction Coolant enable Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.) (2)A4988 Stepper Motor Driver Thermal shutdown circuitry:Yes Crossover-current protection:Yes Ground fault protection:Yes Load short-circuit protection:Yes Compatible logic supply: 3.3V and 5 V Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16 Features: 1.Mix with slow current decay modes. 2.Internal UVLO and Low RDS (On) Output. 3.Automatic current decay mode detection/selection. 4.Synchronous rectification for low power dissipation. Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver) (3)Uno r3 Board For Arduino(more details please search the asin B0168B39N4) Package Included: 1 x Arduino R3 Development Board 1 x Engraver CNC Shield Board 4 x A4988 Stepper Motor Driver 1 x 30 cm USB Cable

Features & Highlights

  • Uno R3 Board for Arduino: USB-TTL used ATMEGA 16U2 chip, controller used ATMEGA 328P chip£¨US ATMEL original, fast transfer and more memory:), the same circuit arrangement and work as original
  • Latest Arduino CNC Shield Version 3.0: grbl compatible (open source firmware that runs on an arduino uno that turns G-code commands into stepper signals) 4-Axis support; jumpers to set the micro-stepping for the stepper drivers; runs on 12-36V DC
  • A4988 Stepper Motor Driver: simple step and direction control interface; thermal shutdown circuit/cross current/ground fault/short circuit protection, five step modes; voltage: 3.3v and 5v; mix with slow current attenuation model etc
  • FCC and CE certification: this high quality arduino cnc kit is well packaged, solder is very clean, everything is aligned nicely, has made function,voltage, current testing before packaging
  • It is really safe and great choose for engraver 3d printer manufacturer, arduino learner and diy machine lover

Additional Information

Brand:
KEYESTUDIO
Manufacturer:
keyes
Category:
Printer Parts & Accessories
Color:
uno cnc kit
Model:
KS0095
MPN:
ks0095
EAN:
9320689532014
Part Number:
ks0095
Publisher:
keyes
Binding:
Electronics
Item Weight:
0.24 pounds
Item Size:
2.24 x 0.79 x 2.28 inches
Package Weight:
0.25 pounds
Package Size:
3.5 x 2.2 x 4.9 inches

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


AC Power Cord Cable For Printers Servers Monitors Computers TV's Televisions - 12ft
By Ecool4U
mpn: 4328393014, ean: 6002658947557,

HP P3015 3015 Fuser NEW OEM RM1-6274
By HP
sku: RM1-6274-NEW-3, mpn: RM1-6274-NEW-3, ean: 0609224770814,

HP 4250 Roller Maintenance Kit , w/ Instructions
By HP
sku: 4250-RK, mpn: MK-4250, ean: 0609728791803,

Docugard Premier Prismatic Business Checks, 3 Checks Per Page, Blue and Green, 24 Pound, 8.5 x 11 Inches, 500 Sheets per Ream (04539)
By DocuGard
mpn: 04539, ean: 0640206653695,



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - tobbynews.com. All Rights Reserved.